Sub System is different from interface.
Sub system just need a command with protocol description and it will work by itself.
Example:
To displaying character in LCD sub system, master module just need to send a protocol data to LCD that describe command to write character in specify column.
How the initialitation and sending process is not done from master module, and it is make more simple program in master module.
Sub sytem that have micro controller inside, will handle the process, and give sign "ACK OK", when the command was accepted clear, and give sign "ACK Error", when the command was accepted wrong or not complete.
|
|
SST-01 LCD Interface
This interface module can accept commands from master system (micro controller or PC ).
Master can control to read data, activing buzzer and save data to EEPROM. |
|
|
- Compatible with Hitachi LCD (7x2 pin) and Standard LCD (16 pin)
- Have 8 sub system address.
- Default (16x2 character), Optional 20x2, 40x2 Char.
- RS232 / TTL Level Communication Port
- 9-12 Volt Power Supply
- Auto/Manual Backlight Adjustment
- Auto/Manual Contrast Adjustment
- 1Kb EEPROM
- Buzzer
- accessable from PC, Micro controller or standalone.
|
|
- SST-01 Module
- RS232 cable
- Manual Book
|
|
|
|
$23
|
|
|
SST-05 Switch
This Module can control 8 switches independently.
if SST - 05 is connecting with RS485, can be parallel up to 30 sub system. |
|
|
- 220V/1000W (Solid State Switch)
- Ground Isolated
- No Mechanical Action
- RS232 Cable
- DC 9-12 Volt
- Can be addressing up to 256 units
- Solid state switch
|
|
- SST - 05 Module
- RS232 Cable
- CD Software tester
- Manual book
|
|
|
|
$55
|
|
|
SST-06
Sub System - 6 Stepper Motor Interface
This module is for control stepper motor, and can recognize commands from master system ( Micro controller or PC ).
Master system can control rotation, speed and total step for each motor with independently and real time. |
|
|
- Control 2 Motor Stepper Unipolar.
- Work with Free running mode, stepping mode or combination.
- Can be control independent and separate ( Speed and total step ).
- Speed can be control from 1-254 step.
- For stepping mode, total step can be reach until 65535 steps
- Work on 9-12VDC for Sub System and 6-24VDC for Motor
- Driver motor separate and independent
- RS-232/TTL Level Communication Port
- Can be addressing untuk 8 Sub System
- Can be access from PC or micro controller
|
|
- SST-06 Module
- RS232 Cable
- CD Software Tester
- Manual Book
|
|
|
|
$20
|
|
|
SST-10
Sub System USB/232 to RF Transceiver
This module can sending data from USB port or RS232 (level TTL) through radio frequency 2.4 - 2.54 GHz. |
|
|
- Maximum Distance 280 meter
- Work in frequency 2.4 - 2.54 GHz.
- Transmition speed 1 Mbps / 250Kbps
- Have 125 Tunnel
- Can be addressing up to 256 units
(mode/package)
- Can be addressing 2 exponential 40 bit (mode/bit)
- Baudrate 9600
- 1Kbyte EEPROM
- Buzzer
- Can be access from Micro controller or PC
|
|
- SST - 10 Module
- USB Cable
- CD Software
- Manual Book
|
|
|
|
$73
|
Order now !!
For further information contact sales@finsdesign.com.