Interface Module is electronic modules that have function as bridge between micro controller system with other hardware most needed in electronic design like infra red, telephone, Motor, ADC, DAC, etc.
|
| |
DF-88 Phone Interface
This module is interfacing micro controller with telephone line.
User can processing signals through that line.
|
|
 |
- Sending/receiving DTMF tone to/from phone line
- Sending/receiving Pulse Dialing to/from phone line
- Detection Call Progress 425 Hz
- connect/disconnect telephone through phone line.
|
 |
|
|
 |
- Detail Info
- Manual book
- Application :
- Hook detector
- House hold controller
- Phone line protection
- SMS through phone line
- log summary telephone activity
|
 |
$25
|
|
| |
ADC-0809
8 Channel Analog to Digital Converter
This module is related with analog system, make conversion from analog to digital signal , controllable or free running.
|
|
|
- 8 tunnel analog input
- Control Mode and dan Free running
- Compatible with DST-5x, SC-51 and SC-AVR
- With jumper for controlling address and interupt
- Adjustable Reference voltage.
|
|
- ADC-0809 Module
- Manual Book
|
|
- Detail Info
- Manual book
- Application :
- Digital Thermometer
- Display 8 tunnel ADC value with serial
- Distance Measure with Infra red GP2D12 module.
|
|
$13
|
|
| |
IR-8510 Infrared Transceiver
This module is using for data communication and controlling system via infra red signal with modulation 38-42 KHz ( TV Remote control freq.)
|
|
|
- Maximum distance 10 meter
- Transmition speed 600 bps
- 2 LED Infrared transmitter
- In circuit modulator
- 38-42 KHz bandpass filter
- Compatible with DST-5x, SC-51 and SC-AVR
|
|
- IR-8510 Module
- Manual book
|
|
- Detail Info
- Manual book
- Application :
- Wireless infra red printer
- displaying TV remote control button on LCD
- House hold controller
- Speed DC motor controller
- Switch controller with TV remote control
|
|
$10
|
|
| |
DQI-01
( Data Aquisition Interface )
This module is 16 bit Analog to Digital Converter.
This module using I2C and just need 2 I/O to access it through SDA and SCL DQI - 01 have standard port that can connect with DST-5x and inline standard port that can connect with ST-51 and DST- R8C.
|
|
|
- DST-5x & Inline Standard Port
- 1Kb I2C Serial EEPROM
- Low Noise 4uVp-p
- Resolution 16 bit
|
|
- DQI-01 Module
- Manual sheet
|
|
|
|
|
$24
|
|
| |
DX-24i Delta X-Ceiver 2.4 GHz
This module is interface between transmitter and receiver in frequency 2.4 GHz. Can be Use in any application that use radio frequency.
have 125 Tunnel frequency and be convert digitally.
|
|
|
- Support 5V ( TTL) and 3.3V
- Frequency range 2.4-2.524 GHz
- Data Rate : 1Mbps, 250Kbps
- Multi Channel : 125 Channel
- Channel switching time<200uS
- 2 receivers work independently
- Built In decoder, encoder, data buffer and CRC
- Built In antenna
- Work mode ShockBurst and Direct.
|
|
- DX-24i Module
- Manual book
|
|
- Detail Info
- Manual book
- Application :
- Sending serial data wireless
- GPS mobile tracking
- RF Remote control
|
|
$65
|
|
| |
DCS-01 Delta Current Sensing
This module using hall effect technic for detection current 20A.
Output can be connecting to ADC.
|
|
|
- 4,5 - 5,5V single supply operation
- 100mV/A output sensitivity and 20A dynamic range
- Output voltage proportional to ac and dc currents
- PCB Fiber & industrial standard
|
|
- DCS-01 Module
- Manual sheet
|
|
|
|
|
$20
|
Order now !!
For further information contact sales@finsdesign.com.
